A wide selection of attachment for our arm mowers is available to improve the versatility and therefore the profitability of the Bomford range.
Bomford attachments are built with the same attention to detail and robust qualities that you have come to expect from the Bomford machinery range.
The Bomford Rotary head is ideal for longer material with a choice of Blade or HD chain cutting options ideal for hedge cutting, operating in either vertical plane or horizontal plane. Its 2.25m sq cutting area makes short work of even the most challenging of tasks. Features Include: 2.25m sq cutting area , Blade or HD chain cutting options
The New Bomford Weedbrush for cleaning pavements, asphalt and paving stones. The brushes are so rigid that they can remove mud and soil from for example gutters, along with doing simple street cleaning. Mounted on long arm cutters with amount on a three point bracket. The Bomford Weedbrush also has the availability of replaceable brush elements. Features Include: 900 mm Diameter, 45 l/min Flow Rate, 230 Kg Weight
BOMFORD has extended its range of saw-blade cutting attachments with the addition of the new ProSaw, a circular saw hedge cutter which is suitable for use with most of Bomford’s reach-arm mower’s. An alternative model is available, that includes a frame – the HRF (Hydraulic Reach Frame) – that enables the ProSaw to be mounted onto a telescopic handler or tractor loader.
The ProSaw is capable of cutting through branches up to 20cm (8.0in) diameter, making it ideal for handling over-grown vegetation, hedges or where conservation stewardship schemes require hedges to be cut less frequently, and so beyond the scope of normal flail heads.
Three versions are available for use on conventional reach-arm mowers, which have cutting widths of 1.6m, 2.0m and 2.4m. The ProSaw comprises of four circular saw blades that are mounted in-line and are hydraulically driven with a maximum power consumption of just 20Kw. For greater versatility all three models can also be mounted on a special frame that allows them to be used on a telescopic handler.
The ProSaw is carried on the HRF extendable carriage, that is adaptable for most common telescopic handler and tractor loader headstocks. For transport, the ProSaw head is manually folded to bring it within the overall width of the telescopic handler or tractor. Two versions of the HRF carriage are available, both of which incorporate an integral side boom facility that enables the ProSaw to be extended sideways by up to 2.8m or 3.3m. The frame also features a hydraulic break-back that allows the ProSaw to swing up to 45° backwards in the event of an obstruction being hit, or the saw being over-loaded.
The Bomford Ditch Cleaner head is both compact, powerful and capable of operating in wet or dry conditions. The Bomford Ditch cleaner can be turned through 90 degrees and used to clean existing roadside “grips” and can be changed from left to right operation in minutes with a choice of blades or cutting teeth. The ditch cleaner head comprises of a 660mm diameter rotary cutting head, that is powered by a multi-stroking radial piston motor.
Depending on requirements, two versions of the Bomford Ditch Cleaner are available. The Standard version requires an oil flow of 80-125 litres/minute and has a motor torque of 12.7kNm with a cutting head rotor speed of between 205-320 rpm. The High Speed version requires an oil flow of 80-100 litres/minute, and whilst the motor torque is lower at 6.5kNm, the cutting head rotor speed is far higher, at 400-500rpm, so providing a far greater throw of material.
Both the Standard and High Speed versions are available with the option of either manual or hydraulic adjustment of the chute angle and rotation angle. On manual versions, the Ditch Cleaner can be rotated through 360° in 45° steps, whilst the discharge chute has six different positions through a 50° arc. On the hydraulic version, whilst the head can again be rotated through 360° in 45° steps, the discharge chute has adjustment up to 70°.
The design of the Ditch Cleaner ensures that the hydraulic motor is fully protected from any damage, whilst the underside of the head is curved in order to ‘smear’ and so seal the bottom of the freshly cut ditch or ‘grip’ for quicker run-off.
Features Include: Left and Right Handed, Blade or Cutting Teeth Option, Suitable for wet and dry conditions